There are many models and types of palm oil processing plant, but the care and maintenance methods required are generally the same. The following are common maintenance precautions for palm oil processing plant summarized by the technicians of Huatai Oil Machinery.

1) All oil cylinders must be kept clean, and any oil or dust stuck to them must be removed promptly.

2) Some grease will be added to the fuel tank of palm oil processing plant in advance to increase the pressure in the tank. The added grease must be clear and free of impurities. It must be filtered before adding, and the grease must be thoroughly cleaned and replaced every once in a while.

3) The safety valve cannot be disassembled and installed at will, and the compression degree of its spring cannot be easily adjusted. Once adjusted improperly, the pressure in the oil tank of palm oil processing plant will be too high, which will cause the oil circuit to explode.

4) Regularly check the use of wearable parts of palm oil equipment and replace them immediately if there is any slight damage.

5) Anti-oxidation measures must be taken when palm oil processing plant is not in use temporarily.

Website: https://www.oilpresscn.com/

Email: info06@cnoilmachine.com